Mitsubishi Electric MELSEC-L Series, Руководство пользователя

Страница: 873 / 1040

15- 7
Chapter 15 Dedicated Instructions
15.4 ZP.TEACH1, ZP.TEACH2, ZP.TEACH3, ZP.TEACH4
These dedicated instructions are used to teach the designated axis.
Setting
data
Usable device
Internal device
File
register
Link direct device J_\_ Intelligent
function
module
U_\G_
Index
register
Zn
Constant
Others
Bit Word Bit Word K, H
(S) – – – –
(D) – – – –
[Instruction symbol] [Execution condition]
ZP.TEACH1
ZP.TEACH1 "Un" (S) (D)
ZP.TEACH2
ZP.TEACH2 "Un" (S) (D)
ZP.TEACH3
ZP.TEACH3 "Un" (S) (D)
ZP.TEACH4
ZP.TEACH4 "Un" (S) (D)
Note) When ZP.TEACH1, ZP.TEACH2, ZP.TEACH3, and ZP.TEACH4 are common to each other, they are designated as
"ZP.TEACH_".
[Setting data]
Setting data Setting details
Setting side
(Note-1)
Data type
"Un"
Head I/O number of Simple Motion module
(00 to FE: High-order two digits of I/O number expressed in three digits)
User BIN 16 bits
(S) Head number of a device in which control data is stored – Device name
(D)
Head number of a bit device which turns ON the operation by one scan at the
time of completion of the instruction.
If the instruction is completed abnormally, ((D) + 1) will also be turned ON.
System Bit
Note) The file register of each of the local device and the program cannot be used as a device for setting data.
(Note-1): The data on the setting side is as follows.
• User : Data before the execution of dedicated instructions is stored by user.
• System: Data after the execution of dedicated instruction is stored by PLC CPU.