![background image](http://html.mh-extra.com/html/mitsubishi-electric/melsec-l-series/melsec-l-series_user-manual_2387571008.webp)
Appendix - 60
Appendices
(3) Control of FR-A700 series parameters
Parameters set in FR-A700 series are not controlled by Simple Motion
module. Set the parameters by connecting FR-A700 series directly with the
operation panel on the front of inverter (FR-DU07/FR-PU07) or FR
Configurator that is inverter setup software. Confirm the instruction manual
of FR-A700 series for details of the setting items.
POINT
In the state of connecting between FR-A700 series and Simple Motion module, only
a part of parameters can be set if the parameter of the inverter "
Pr.77
Parameter
write selection
" is in the initial state. Set "2: Write parameters during operation" to
rewrite the parameters of FR-A700 series.
(4) Reset selection/disconnected PU detection/PU stop selection
When PU stop is executed in FR-A700 series, position error excessive, etc.
occur because a command from Simple Motion module does not stop. Set
"0 to 3" in the parameter of the inverter "
Pr.75
Reset selection/disconnected PU
detection/PU stop selection
". To stop FR-A700 series, use the stop signal and
the forced stop of Simple Motion module, or use the output stop (MRS) of
FR-A700 series.
Setting item
Default
value
Setting
value
Details
Pr.75
Reset selection/
disconnected PU
detection/
PU stop selection
14
0
• Reset input is always enabled.
• If the PU is disconnected, operation will be continued.
• PU stop is disabled at SSCNET connection.
1
• A reset can be input only when the protective function is activated.
• If the PU is disconnected, operation will be continued.
• PU stop is disabled at SSCNET connection.
2
• Reset input is always enabled.
• When the PU is disconnected, the inverter trips.
• PU stop is disabled at SSCNET connection.
3
• A reset can be input only when the protective function is activated.
• When the PU is disconnected, the inverter trips.
• PU stop is disabled at SSCNET connection.
14
• Reset input is always enabled.
• If the PU is disconnected, operation will be continued.
• Deceleration stop by PU stop in any operation mode.
15
• A reset can be input only when the protective function is activated.
• If the PU is disconnected, operation will be continued.
• Deceleration stop by PU stop in any operation mode.
16
• Reset input is always enabled.
• When the PU is disconnected, the inverter trips.
• Deceleration stop by PU stop in any operation mode.
17
• A reset can be input only when the protective function is activated.
• When the PU is disconnected, the inverter trips.
• Deceleration stop by PU stop in any operation mode.
(Note): Note that the default value is set to "14". (Change the value to "1 to 3".)
Содержание MELSEC-L Series
