Mitsubishi Electric MELSEC-L Series, Руководство пользователя

Страница: 69 / 1040

2 - 9
Chapter 2 System Configuration
2.5 Restrictions by the SERIAL No. and version
There are restrictions in the function that can be used by the SERIAL No. of the Simple
Motion module and the version of GX Works2.
The combination of each version and function is shown below.
Function
LD77MS2/LD77MS4 LD77MS16
Reference
First five digits of
SERIAL No.
(Note-1)
GX Works2
First five digits of
SERIAL No.
(Note-1)
GX Works2
Operation cycle setting for
LD77MS2/LD77MS4
15062 or later 1.493P or later — —
Section 5.2.7
Section 5.6.1
Servo driver (VCII series)
manufactured by Nikki Denso Co.,
Ltd. (SSCNET /H)
16012 or later 1.507D or later 16012 or later 1.507D or later
Appendix 6.1
Servo driver (VPH series)
manufactured by Nikki Denso Co.,
Ltd.
17102 or later 1.540N or later 17102 or later 1.540N or later
MR-JE-B 16102 or later 1.525X or later 16102 or later 1.525X or later Appendix 6.5
Hot line forced stop function 16102 or later — 16102 or later — Section 14.15
AlphaStep/5-phase stepping motor
driver manufactured by ORIENTAL
MOTOR Co., Ltd. (SSCNET /H)
17072 or later 1.535H or later 17072 or later 1.535H or later Appendix 6.3
IAI electric actuator controller
manufactured by IAI Corporation
(SSCNET /H)
17072 or later 1.540N or later 17072 or later 1.540N or later Appendix 6.4
Optional data monitor function data
type
Internal temperature of encoder,
Module power consumption (Used
point: 2 words)
18082 or later 1.550Y or later 18082 or later 1.550Y or later Section 14.11
(Note-1): The serial number can be checked on the "Product Information List" screen in GX Works2.