manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 93 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 93

GL-10x0 

Administrator’s Guide

71

Operating System and Networking Requirements

„

Windows

 

98

„

Novell Client v3.4 or higher and Client Service Pack 1 are 

required to run IPX-based SNMP access and Novell printing.

„

The Microsoft Client for NetWare can replace the Novell Client 

except for NDPS printers.

„

Windows Me

„

Novell Client v3.4 or higher is required to run IPX-based SNMP 

access and Novell printing.

„

The Microsoft Client for NetWare can replace the Novell Client 

except for NDPS printers.

„

Windows NT 4.0

„

Microsoft Service Pack 6A or higher

„

Novell Client v4.9 SP1a or higher with Z.E.N works Starter Pack 

and Service Pack 1 are required to run IPX-based SNMP access 

and Novell printing.

„

The Microsoft Client for NetWare can replace the Novell Client 

except for NDPS printers.

„

Windows 2000

„

Microsoft Windows 2000 Service Pack 4 or higher

„

Novell Client v4.9 SP1a or higher with Z.E.N works Starter Pack 

is required to run IPX-based SNMP access and Novell printing.

„

The Microsoft Client for NetWare can replace the Novell Client 

except for NDPS printers.

„

Windows XP SP2+

„

Novell Client v4.9 SP1a or higher is required to run IPX-based 

SNMP access and Novell printing.

„

The Microsoft Client for NetWare can replace the Novell Client 

except for NDPS printers.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments