Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 216 / 427

194 GL-10x0 Administrator’s Guide
When
dfactorydefault=on
, only this option is sent to the printer which
reverts to the factory defaults. When other options are set
(
dfactorydefault
is off or not set), then those options are sent to the
printer.
If the option values specified are outside the indicated limits for dpitch,
dpointsize, dorientation, dformlines, and dsymbolset, then their
respective default values are used.
Example: The command to set the default factory pitch to 10 is
lp –o
dpitch=10 <filename>
.
Orientation
The following orientation options are available.
If this option is not specified, the default value is used.
Example: The command to specify landscape orientation is
lp –o
landscape <filename>
.
dorientation= < value> Set the orientation to < value >.
0 – Portrait orientation is used.
1 – Landscape orientation is used.
The default is 0.
dformlines= < value> Set the number of form lines to < value> . The range available is
5.00
to
128.00
. The default is
12.00
.
dsymbolset= < value> Set the symbol set to < value> . The range available is
1
to
999
. The
default is
341
(PC-8).
dfactorydefault= < value> Set the factory default settings for pitch, point size, orientation,
formlines, and symbolset.
OFF or off: <
value >=0. Factory default settings are not used.
ON or on: < value >=1. Factory default settings are used.
Orientation Options
Option Value Description
portrait Prints the document in portrait orientation.
landscape Prints the document in landscape orientation.
Factory Default Setting Options
Option Value Description