Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 170 / 427

148
GL-10x0
Administrator’s Guide
6 Click the
Frame Type
drop-down list.
7 Select the appropriate setting.
8 Click
Save
.
Configuring TCP/IP Settings
1 Log in as an administrator.
2 On the Administration tab, click the
Setup
subtab.
3 Click the
Wireless Network
link. The Wireless Network page opens.
4 In the TCP/IP area, click the
IP Address Resolution
drop-down list.
5 Select either
Static IP
or
DHCP
.
Note: If DHCP is selected, the
IP Address
,
Subnet Mask
and
Gateway
fields
are not displayed.
6 Enter the
IP Address
,
Subnet Mask
, and
Gateway Address
if appropriate.
7 Enter the address of the
Primary DNS Server
.
8 Enter the address of a
Secondary DNS Server
.
9 Continue with the instructions in Configuring SMB Settings on
page 149.
Configuring Wireless DDNS
Dynamic DNS services allow a DHCP server to set the device Host Name
at the same time that it sets the IP address, gateway, and other
parameters. For those sites with large numbers of printers, DDNS allows
new printers to be configured automatically.
To configure DDNS:
1
Log in as an administrator.
2 On the Administration tab, click the
Setup
subtab. The Setup page
opens.
3 Click the
Wireless Network
link. The Wireless Network page opens.
4 In the DDNS area, click the down arrow beside the
Update DNS
Dynamically
pull-down list box.
5 Select
Enable
to enable DDNS or
Disable
to disable DDNS.
6 Enter the host name of the DNS server in the
Host Name
field. This field
is disabled if DDNS is disabled. The default value for this field is the
MAC address of the controller.