Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 333 / 427

GL-10x0 Administrator’s Guide 311
16
Troubleshooting Hardware Errors
The topics in this chapter cover those errors or faults that affect normal
copier or controller operation. This includes, but is not limited to, the
following conditions:
„
Faulty or improperly installed system board, cables, and connectors.
„
Faulty or malfunctioning copier components, such as standard or
optional finishing units, the Auto-Duplexing Unit (ADU), or Large
Capacity Feeder (LCF).
„
Corrupt or outdated controller software or copier firmware.
„
Interrupted or terminated communication between the copier and the
controller.
Note: Resolving copier operation problems falls outside the scope of
this guide, but this chapter helps you interpret error messages and
then identify the source of the problem. If you determine that the
problem is related to copier operation, refer to the Toshiba Operator’s
Guide for Copying Functions.
This chapter also covers using the administration utility, TopAccess, to
diagnose and resolve hardware-related errors. For more information
about resolving error messages displayed on the LCD touch screen, refer
to the Toshiba Operator’s Guide for Copying Functions or the LCD online
Help.