Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 149 / 427

GL-10x0
Administrator’s Guide 127
5 Select
Enable
or
Disable
as required for each service you want to
change.
6 Click
Save
.
Configuring IPP (Internet Printing Protocol)
IPP Print Services are enabled by default.
1
Log in as an administrator.
2 On the Administration tab, click the
Setup
subtab.
3 Click the
Print Services
link. The Print Services page opens.
4 In the IPP Printing area, click the
Service
drop-down list.
5 Select
Enable
or
Disable
as required for each service you want to
change.
6 Click
Save
.
Configuring Mac Printing
Macintosh Print Services are enabled by default.
1
Log in as an administrator.
2 On the Administration tab, click the
Setup
subtab.
3 Click the
Print Services
link. The Print Services page opens.
4 In the Mac Printing area, click the
Service
drop-down list.
5 Select
Enable
or
Disable
as required for each service you want to
change.
6 Enter a
Mac Printer Name
.
7 Enter a
Mac Printer Name for Wireless
(if the wireless NIC is installed).
8 Click
Save
.
Configuring Raw TCP Printing
Configuring raw TCP printing enables or disables access to port 9100.
This is the only port that supports the sending of raw, TCP print jobs. LPR
print jobs can be sent to any of the established queues.
To configure raw TCP printing:
1
Log in as an administrator.
2 On the
Administration
tab, click the
Setup
subtab.
3 Click the
Print Services
link. The Print Services page opens.