Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 302

Page: 302 / 427

280

GL-10x0 Administrator’s Guide

Click

Delete Files

Warning!

When you delete the Processing Data folder, which contains

current job data, TopAccess automatically deletes the jobs and

message logs.

TopAccess displays the message,

Are you sure you want to

delete these data? This will reboot the controller?

Click

to proceed or

Cancel

to end the procedure. TopAccess displays

the Reboot page and the controller reboots.

Font Management

You can upload fonts to the controller and change the amount of space

allocated for font storage.
1

Click the

Administration

tab.

On the Administration tab, click the Maintenance submenu.

Click the

Font Management

link to open the Font Management page.

Font Management Page

Enter the amount of space on the controller hard drive that you want

to allocate for font storage in the

Space Allocated for Font Storage

text box.

Click the

PCL

check boxes to identify the type of fonts you want

to manage.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 302 / 427

Search results

Summary of Contents for e-STUDIO GL-1010

Reviews: