Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 221 / 427

GL-10x0 Administrator’s Guide 199
„
The number of copies of the job
„
The name of the printer or its IP address
„
The date and time when the job was printed according to the print
server
„
A short summary listing the available options
Only one copy of the banner page is printed for each file, even if a number
of copies of the job are requested.
The banner page is sent to the controller as a separate sub-job and is
never stapled to the document.
The banner page is printed with the following settings.
„
Copies = 1
„
Stapling off
„
Orientation = portrait
„
Duplex off
„
Paper size as requested by the
-o
parameter or the printer default
value
„
Auto paper source selection or the requested banner page source or
media type
„
Output bin as requested by the
-o
parameter or the printer default
value
„
6 lines per inch
„
Auto-wrap on
„
Automatic carriage-return when a line-feed is sent
The banner page is designed to fit Statement/A5 and larger paper. If the
paper selected is smaller, the banner page may wrap onto two pages.
The default setting causes the banner page to print before the job so that
it is in the correct stacking order.
When the language is set to
raw
the banner is always disabled.
You can set the paper source and the media type for the banner page to
different values than the job paper source and media type. If a banner
paper source is not specified, the auto source command is sent. If a
banner media type is not specified, no banner media type command is
sent, so the default value is used.
If the file being printed specifies the paper destination or the paper size
internally, the banner page may print to the wrong output or on an
incorrect paper size.