Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 204 / 427

182 GL-10x0 Administrator’s Guide
For example, to change the default orientation to Landscape, add the
following line:
orient=
“
LANDSCAPE
”
To learn the valid options that you can enter in the
<queue name>.conf
file:
1
After you install the filter, run the command:
find / -name
net_gl10X0
.
2 Run the command
more <PATH>/net_gl10X0
. This file contains all of
the valid options that you can use.
Use these commands as follows:
„
Locate the command of interest. For example:
nobanner | nb )
banner="none"
„
The valid option to enter into the
<queue name>.conf
file is:
banner="none"
With some of the options you have to set more than one parameter. For
example, for booklet printing, locate
booklet=letter | booklet=lt | booklet=LT )
booklet="LT"
booklet_paper="LETTER"
The valid option to enter into the
<queue name>.conf
file is
booklet="LT"
booklet_paper="LETTER"
The values stored in this file are case sensitive and they must conform to
the
/bin/sh
variable format.
Printing to the Controller in Unix
LP Command
Use the
lp
command (
lptap
in Linux) to send a file to the controller for
printing. The lp command is supported by Solaris, AIX, HP-UX, and
OpenUnix/Sco Unix. This command specifies various printer-specific
options using the
-o option
parameter on the command line. The
lp
command also sets other print options using various other parameters.
Use the
man net_gl10X0.1
command to view the online document that
describes the various options and parameters that you can set to
configure printed output.