manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 111 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 111

GL-10x0 

Administrator’s Guide

89

7

To change the tab displayed when you first access TopAccess, select 

the tab from the 

Start Page

 pull-down list.

8

To change the display language used by TopAccess, select the 

language you want from the 

Language

 pull-down list.

Managing Counters

The controller keeps track of the number of pages printed, copied, and 

scanned and maintains a set of counters. These statistics can be 

displayed in totals or broken down by department. This topic describes 

how to view the statistics and manage department counters.
All users can view the statistics maintained by the controller. If you use 

department codes, you can also reset department counters and save 

department statistics in a format that you can use for reporting.
Only administrators can reset the scan counters.

Viewing Job Statistics

The Counters page shows job statistics by department and for all 

departments. You must enter a valid department code to access this 

information.

TopAccess Counters Page

To view the count for a department:
1

Click the 

Counters

 tab. The Copy/Print page opens.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments