manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 21 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 21

GL-10x0 Administrator’s Guide

xvii

Scan Operator’s Guide

You can find a .PDF version of this guide in the 

e-STUDIO Client CD-ROM

. 

It provides information on enabling network scanning functionality via 

the controller and includes procedures for configuring scan functionality 

using the web-based utility, TopAccess. The guide also provides 

instructions for local scanning and remote management of scan jobs.

Application-Specific Online Help

All of the Electronic Document Processing System software and drivers 

come with application-specific online help. Click 

Help

 or choose the 

Contents and Index

 options from the Help menu. For web-based help in 

TopAccess, click the 

Help

 link.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments