Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 357

Page: 357 / 427

GL-10x0 Administrator’s Guide

335

Invalid File Handle

Problem Description

This condition may arise due to a network problem, disk I/O error, or

software bug. It is most likely the result of an unrecoverable disk error.

Corrective Action

Run ScanDisk, or another similar diagnostic tool.

Restore the corrupt or missing files from a backup source or reinstall

the software.

Invalid Handle

Problem Description

This condition arises when there is an attempt made to access an invalid

physical memory address.

Corrective Action

Exit the application.

Restart the application.

If the condition persists, uninstall and reinstall the software from the

distribution CD.

Open .dll File Error Message

Problem Description

When you are trying to install client software, an error message indicates

that you are trying to install a .dll that another program has already

opened.

Corrective Action

Close all applications before installing any TOSHIBA client software.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 357 / 427

Search results

Summary of Contents for e-STUDIO GL-1010

Reviews: