Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 365 / 427

GL-10x0 Administrator’s Guide 343
2 Double-click
Add Printer
from the Printers folder, but when prompted to
locate the driver, click
Have Disk
.
3 Browse to the subdirectory that contains the appropriate *.inf file.
Location Does Not Contain Information About Your
Hardware
Problem Description
The path to the *.inf file selected during driver installation is too far away.
In other words, there are too many characters in the directory path.
Corrective Action
Copy the directory containing the *.inf file to the local drive and resume
installation.
This Port is Currently in Use
Problem Description
The driver is either open, printing a job, or is in use by another printer or
application when you attempted to delete it.
Corrective Action
Make sure all print jobs have completed before deleting a port. If there are
still problems, exit all applications and try again. Check each driver to see
if another driver is using the same port. If so, first change the driver port
setting and then delete the port.
Problem with the Current Printer Setup
Problem Description
The driver was not set up properly, possibly because the installation
procedure did not complete.
Corrective Action
Delete the driver and either reinstall it from the distribution CD-ROM or
download it from the controller. Refer to the Operator’s Guide .