manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 209 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 209

GL-10x0 Administrator’s Guide

187

In PostScript, 

Deferred Media Selection

 is always turned on so the paper size 

has priority over the media type and the paper source. In PCL5e the paper 

size always has priority over the media type and the paper source.
If this option is not specified, the default value is used.
Example: The command to specify letterhead media type is 

lp –o 

mtype=Letterhead  <filename>

.

Duplexing

The current duplex mode can be specified using the following options.

If this option is not specified, the default value 

simplex

 is used.

You do not have to specify duplexing for 

Booklet Mode

 (sduplex).  Setting 

duplexing separately can override the booklet mode setting for duplexing.
Example: The command to specify long edge duplexing is 

lp –o duplex  

<filename>

.

Paper Sizes

Specify the paper size using the following options.

Duplexing Options

Option Value

Alternate Value Description

simplex

Turns duplexing off.

duplex

lduplex
duplex_long
duplex=long
hduplex

Turns duplexing on with long edge binding.

sduplex

duplex_short
duplex=short
vduplex

Turns duplexing on with short edge binding.

Paper Size Options

Option Value Alternate Value Description

letter

lt, LT

Select letter size paper.

A4

A4

Select A4 size paper.

legal

lg, LG

Select legal size paper.

statement

st, ST

Select statement size paper.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments