manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 92 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 92

70

 GL-10x0 

Administrator’s Guide

Overview

TopAccess has two web sites available. One site is designed for end users 

and the other is for administrators.

„

The end-user site displays controller and scan job status as well as 

enabling users to create and maintain private groups and templates.

„

The administrator site enables you to configure controller settings, 

conduct maintenance, and update the address book, public group, 

and public templates.

With TopAccess, administrators and service engineers can:

„

View controller status

„

Configure controller and network properties

„

Set up default print options

„

View and modify job queues

„

View and modify copier attributes

„

View cassette/accessory configuration

„

View and clear the log files for jobs, messages, and counters

„

Locate other TOSHIBA devices on the network

„

Upload client software to the network

„

Install client software

„

Initiate a scan

With TopAccess, end users can:

„

View general copier information including controller status and alerts

„

View cassette/accessory configuration

„

View and modify the status of your jobs

„

View the counter logs

„

Locate other TOSHIBA devices on the network

„

Install client software

Note: Because TopAccess uses cookies to store persistent information 

on your system, you must have cookies enabled in your browser for 

TopAccess to work correctly.

System Requirements

Before installing the software, make sure your network and client 

workstations meet the following minimum requirements:

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments