Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 222 / 427

200 GL-10x0 Administrator’s Guide
Banner Options
Control the appearance of the banner page with the following options.
The default value for this option is that the banner page prints first.
Banner Paper Source
Specify the banner paper source using the following options.
If the banner paper source is not specified, the PCL5e auto paper source
command
<esc>&l7H
is sent. You cannot set the banner page source to
manual feed. The paper size always has priority over the paper source.
Example: The command to specify that the banner page paper source to
the tandem LCF is
lp –o btandem <filename>
.
Banner Page Options
Option Value Alternate Value Description
banner=last Print the banner after the job so that it will be physically
on top of the job in the output tray.
banner=first banner Print the banner before the job so that it will be physically
under the job in the output tray.
nobanner nb Do not print a banner. The ability to specify the
“nobanner” option can be disabled by the system
administrator to force all jobs to print with a banner. Even
if the “nobanner” option is disabled the banner can still
be disabled by using the “nb” or the “raw” option.
Banner Paper Source Options
Option Value Alternate Value Description
bauto-source Select the auto paper tray selection.
btandem Select the tandem paper tray.
bexternal Select the upper paper tray.
bupper bcas1 Select the upper paper tray.
blower bcas2 Select the middle paper tray.
bpedupper bcas3 Select the pedestal upper paper tray.
bpedlower bcas4 Select the pedestal lower paper tray.