Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 366

Page: 366 / 427

344

GL-10x0 Administrator’s Guide

Printer Driver General Errors

Driver Mapped to Wrong Port

Problem Description

If the printer driver on a client workstation points to the wrong network

port, jobs do not appear in the current jobs queue or print out.

Corrective Action

Open the Printers folder from the Control Panel.

Right-click the TOSHIBA printer driver icon.

Select

Properties

from the shortcut menu.

Depending on the operating system, select the following tab:

Make sure that the path to the printer and the device name are

correct:

\\<device name \<driver>

Where <

device name

> is the same as the device name set from the

copier LCD touch screen. <

driver

> should be one of the following

TOSHIBA drivers:

GL_PCL6

GL_PS

Click the

General

Tab and click

Print Test Page

to confirm that the

settings are correct.

Command Line Options Not Processed by the Controller

Problem Description

All print options are sent to the controller at the start of the print job. If

the print file already contains print commands, they override the

command line options you set. For example, if the print file specifies the

letter media, and you specify the A4 media option with the

command,

In Windows 98/Me/2000/XP:

In Windows NT:

Select Details. Browse to
select the printer or Novell
queue.

Select Ports. Add a new
port and map it to the
printer. Refer to the

Operator’s Guide

for

instructions.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 366 / 427

Search results

Summary of Contents for e-STUDIO GL-1010

Reviews: