Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 185

Page: 185 / 427

GL-10x0

Administrator’s Guide

163

End-User Benefits

All printers are discovered automatically, allowing users to simply

select the appropriate one.

NDPS automatically downloads the correct printer driver to the user’s

machine.

NDPS supports customized print configurations.

NDPS supports drag and drop printing.

NDPS supplies real-time printer status.

Overview of TOSHIBA’s NDPS Gateway

Because the controller is not an

NDPS-aware

printer, it requires a

gateway

to emulate the NDPS model. The TOSHIBA

gateway mechanism

employs several components, notably the NDPS Manager, NDPS Broker,

and NDPS Printer Agent. The following figure illustrates the

communication flow between these objects.

Communication Flow

Note: While this diagram illustrates the NDPS gateway, broker/

manager, and printer agent as distinct objects, they are actually all

NLM applications residing on the NetWare file server.

The NetWare printer can be discovered in two ways:

The printer is automatically discovered by the TOSHIBA NDPS

gateway.

P = Printer agent
M = Manager
B = Broker

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 185 / 427

Search results

Summary of Contents for e-STUDIO GL-1010

Reviews: