manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 215 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 215

GL-10x0 Administrator’s Guide

193

Inserter Paper Orientation

You can select face up or face down inserter paper orientation using the 

following option.

If this option is not specified, the default value, face up, will be used.
The command to select face down inserter paper orientation is 

lp –o 

insertinv=on <filename>

.

Tab Paper Source

You can select the paper source for tabbed paper using the following 

option.

If you do not specify this option, the printer default value is used.
The command to use the lower tray to feed tabbed paper is 

lp –o 

tabsource=lower <filename>

.

Factory Default Settings

Specify the factory default setting with the following options.

Inserter Paper Orientation Option

Option Value

Description

insertinv=off

Selects face up orientation for inserter paper.

insertinv=on

Selects face down orientation for inserter paper.

Tabbed Paper Source Options

Option Value

Description

tabsource=lower

Selects the lower tray for tabbed paper stock

tabsource=bypass

Selects the bypass tray for tabbed paper stock

Factory Default Setting Options

Option Value

Description

dpitch= <

value>

Set the pitch to <

value>

.  The range available is 

0.44

 to 

99.99

. The 

default is 

12.00

.

dpointsize= <

value>

Set the point size to <

value>

.  The range available is 

4.00

 to 

999.75

. 

The default is 

10.00

.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments