manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 84 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 84

62

GL-10x0 Administrator’s Guide

8

To change the print properties, press 

PROPERTY

. The 

TopAccessComposer Print Properties screen opens.

TopAccessComposer Print Properties Screen

9

Modify the print settings and press 

PRINT

.

10 Press 

C

ANCEL

 to return to the TopAccessComposer Login screen.

Creating and Using Department Codes

The Electronic Document Processing System uses counters to keep track 

of the number of pages printed, copied, and scanned. It displays these 

statistics as totals or by department.
Each department has a name and a corresponding five-digit code. With 

the department code feature enabled, if you enter a department code 

when using the printer drivers, the controller adds the number of printed 

pages to the counter for that department. When no department codes 

exist, the system assigns all prints, copies etc. to a default department 

called UNDEFINED.
If the department code feature is enabled, the administrator may enable 

department code enforcement from TopAccess. If the department code 

feature is disabled, the department code enforcement option is 

unavailable.
When enabled, this option requires all users to enter a valid department 

code to print to the controller.

Note: There is no enforcement of department codes in Unix filters, 

Linux filters, Macintosh PPD files, or raw print jobs.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments