manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 16 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 16

xii

GL-10x0 Administrator’s Guide

Printer Drivers

The 

e-STUDIO Client CD-ROM

 and 

e-STUDIO Admin’s Client CD-ROM

 

contain several printer drivers, filters and utilities to allow cross-platform 

printing to the controller from client machines running Windows, Unix, or 

Macintosh operating systems. They are described in detail below:

Windows Printer Driver

For the Windows 98/Me/2000/XP and Windows NT operating systems, 

you can install these drivers for either controller to provide network 

printing:

„

PCL6

„

PostScript 3 (level 1, 2, and 3 compatible)

The PCL and PS printer drivers allow end users to define job properties 

from the orientation and resolution of their pages to complex finishing 

options such as booklet layout and multi-position stapling.
End users can also enhance their printed documents with image overlays 

and watermarks. Then, by using the Proof Print feature, they can check 

the output by printing a 

proof

 copy before printing an entire multi-copy 

job. Users can also employ private print mode, so that their secure or 

confidential documents are held until they enter the DIN at the copier. 

The scheduled print feature allows users to take advantage of off-peak 

hours to print large jobs.
Other features include print profiles, which allow users to define specific 

settings so that they can configure future jobs with a click of the mouse.
Other features that the printer drivers support are cover printing, sheet 

insertion, and page interleaving.

Macintosh Printer Drivers

For the Macintosh platform, software includes a PPD driver extension file 

for OS 9.2.2+ and one for OS 10.2.6+. The PPD file for OS 9.2.2+ works in 

conjunction with the standard Macintosh LaserWriter 8 printer driver, 

version 8.6.5 or higher, to provide printing through the controller.

Unix Print Filters

Filters in TAR format are distributed on the 

e-STUDIO Admin’s Client CD-

ROM

 to provide printing services from Unix machines running the HP-UX, 

Sun Solaris, IBM AIX, OpenUnix/ScoUnix, or Linux operating systems.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments