manualshive.com logo in svg

Toshiba e-STUDIO GL-1010, Administrator'S Manual, Page: 368 / 427

Share
Download
Toshiba e-STUDIO GL-1010 Administrator'S Manual Download Page 368

346

 GL-10x0 Administrator’s Guide

TWAIN Driver Errors

Cannot Find the Controller

Problem Description:

Cannot find the controller using the 

Search

 button.

Corrective Action:

Confirm that the user’s workstation and the controller are properly 

connected to the NetBIOS network. Make sure that the selected 

workgroup name is correct. If the controller is out of the subnet on which 

the user's workstation exists, enable access to the controller via NetBIOS 

over TCP/IP by specifying the controller machine name and IP address in 

the WINS server or 

lmhosts

 file in the user's workstation. Then try 

entering the controller machine name directly in 

Machine Name

.

Cannot Access TWAIN Folder

Problem Description:

Cannot access the 

\\<controller>\GL_TWAIN

 folder from Windows 

Explorer.

Corrective Action:

This network folder contains Scan to TWAIN documents and can be 

accessed only using the GL-TWAIN Driver.

TWAIN Driver Dialog Box Does Not Open

Problem Description:

Initiated the TWAIN image acquisition mode from an application, but the 

GL-TWAIN Driver dialog box does not open.

Corrective Action:

The GL-TWAIN Driver dialog box may be hidden behind other windows. 

Minimize all other windows. If you cannot find the dialog box, enable the 

Show UI

 feature of the GL-TWAIN driver from the application. See the 

scan 

Readme

 file for more detail.

Summary of Contents for e-STUDIO GL-1010












































































































































































































































































































































































































































Reviews:

No comments