Renesas SH7763, Hardware Manual

Page: 762 / 2026

Section 19 Timer Unit (TMU)
Rev. 1.00 Oct. 01, 2007 Page 696 of 1956
REJ09B0256-0100
19.3.5 Timer Control Registers (TCRn) (n = 0 to 5)
The TCR registers are 16-bit readable/writable registers. Each TCR selects the count clock,
specifies the edge when an external clock is selected, and controls interrupt generation when the
flag indicating TCNT underflow is set to 1. TCR2 is also used for input capture control and
control of interrupt generation in the event of input capture.
•
TCR0, TCR1, TCR3, TCR4 and TCR5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
TPSC0 TPSC1 TPSC2 CKEG0 CKEG1 UNIE
— — UNF — — — — — — —
R/W R/W R/W R/W R/W R/W R R R/W R R R R R R R
BIt:
Initial value:
R/W:
•
TCR2
0 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
TPSC0 TPSC1 TPSC2 CKEG0 CKEG1 UNIE ICPE0 ICPE1
UNF ICPF — — — — — —
R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R R R R R R
BIt:
Initial value:
R/W:
Bit Bit Name
Initial
Value
R/W Description
15 to 10 — All 0 R Reserved
These bits are always read as 0. The write value should
always be 0.
9 ICPF
*
1
0 R/W Input Capture Interrupt Flag
Status flag, provided in channel 2 only, which indicates
the occurrence of input capture.
0: Input capture has not occurred
[Clearing condition]
When 0 is written to ICPF
1: Input capture has occurred
[Setting condition]
When input capture occurs
*
2
8 UNF 0 R/W Underflow Flag
Status flag that indicates the occurrence of TCNT
underflow.
0: TCNT has not underflowed
[Clearing condition]
When 0 is written to UNF
1: TCNT has underflowed
[Setting condition]
When TCNT underflows
*
2