Hino 238, Workshop Manual

Page: 525 / 919

ENGINE CONTROL SYSTEM (J08E) 4–1302
CHECKLIST: P268A and P2696
DTC: P268A Fuel injector adjustment data error
Inspection procedure
DTC: P2696 Fuel injector adjustment data error
Step Action Description Judgement
Check
(Yes/No)
Yes No
1
Check injector
replaced
record
Check injector replaced record.
History of
replacement
found: Go to
YES.
History of
replacement
not found: Go
to NO.
Go to step 3. Go to step 2.
2
Inspect the
injector cali-
bration data
(QR CODE)
[Hino-DX]
1. Re-input the registration
injector calibration data (QR
CODE) of the service
server.
2. Erase the DTC memory, and
check again DTC code.
Check that DTC (P268A or
P2696) is not displayed in
[Fault Information].
the DTC has
been detected:
Go to YES.
No DTC has
been detected:
Go to NO.
Go to step 3.
Procedure
completed.
Perform "After-
inspection
work" of
INFORMA-
TION section.
3
Inspect the
injector cali-
bration data
(QR CODE)
[Hino-DX]
Check if the DTC (P268A or
P2696) has been detected in
[Engine].
DTC (P268A
or P2696) has
been detected:
Go to YES.
No DTC has
been detected:
Go to NO.
Replace the
engine ECU.
Perform "After-
inspection
work" of
INFORMA-
TION section. Procedure
completed.
Perform "After-
inspection
work" of
INFORMA-
TION section.