Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 961 / 1225

COPIER (Service mode for copier) > TEST (Print test mode) > PG
COLOR-C 1 Setting of C-color output at test print
Detail To set whether to output C-color at the time of test print.
The setting is applied to all types.
When setting COLOR-C to 1 and COLOR-Y/M/K to 0, a single C-color is output.
Use Case At test print
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: Not output, 1: Output
Default Value 1
Related Service Mode COPIER> TEST> PG> COLOR-Y/M/K
COLOR-K 1 Setting of Bk-color output at test print
Detail To set whether to output Bk-color at the time of test print.
The setting is applied to all types.
When setting COLOR-K to 1 and COLOR-Y/M/C to 0, a single Bk-color is output.
Use Case
At test print
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 1
0: Not output, 1: Output
Default Value
1
Related Service Mode COPIER> TEST> PG> COLOR-Y/M/C
F/M-SW 1 Setting of PG full color/single color
Detail To set whether to output PG in full color or single color.
Use Case When identifying the cause whether it's due to full color or single color
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: Full color, 1: Single color
Default Value 0
PG-PICK 1 Setting of test print paper source
Detail To set the paper source at the time of test print output.
Use Case
At problem analysis
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
1 to 8
1: Cassette 1, 2: Cassette 2, 3: Cassette 3, 4: Cassette 4, 5: Multi-purpose Tray, 6 to 8: Not used
Default Value
1
2-SIDE 1 Set of 1-sided/2-sided print for PG
Detail To set whether to output the PG as 1-sided or 2-sided printing.
Use Case At problem analysis
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: 1-sided, 1: 2-sided
Default Value 0
8. Service Mode
949