Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 811 / 1225

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > FEED-ADJ
ADJ-C4RE 1 Write start pstn in horz scan: Cst4,2nd
Detail To adjust the image write start position on the second side in the horizontal scanning direction
when feeding paper from the Cassette 4.
As the value is changed by 1, the left margin is changed by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
Use Case When replacing the DC Controller PCB/clearing RAM data
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range -55 to 55
Unit mm
Default Value 0
Amount of Change per
Unit
0.1
ADJ-MFRE 1 Write start pstn in horz scan:MP Tr, 2nd
Detail To adjust the image write start position on the second side in the horizontal scanning direction
when feeding paper from the Multi-purpose Tray.
As the value is changed by 1, the left margin is changed by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
Use Case When replacing the DC Controller PCB/clearing RAM data
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range -55 to 55
Unit mm
Default Value 0
Amount of Change per
Unit
0.1
REG-THCK 1 Adj registration start timing: 1/2 speed
Detail To adjust the timing to turn ON the Registration Motor at 1/2 speed.
As the value is changed by 1, the leading edge margin is changed by 0.1 mm.
+: Leading edge margin becomes larger. (An image moves downward.)
-: Leading edge margin becomes smaller. (An image moves upward.)
Adj/Set/Operate Method
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range
-50 to 50
Unit
mm
Default Value 0
Amount of Change per
Unit
0.1
REG-DUP1 1 Adj register start timing: 1/1 SPD, 2nd
Detail To adjust the timing to turn ON the Registration Motor when feeding 2nd side at 1/1 speed.
As the value is changed by 1, the leading edge margin is changed by 0.1 mm.
+: Leading edge margin becomes larger. (An image moves downward.)
-: Leading edge margin becomes smaller. (An image moves upward.)
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Display/Adj/Set Range -50 to 50
Unit mm
Default Value 0
Amount of Change per
Unit
0.1
8. Service Mode
799