manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 516

 Formatting FLASH PCB or Hard Disk by Download Mode

■ Format Overview

The following 3 types of formatting/initialization methods are available with this machine.

[ [ [ [ [ [ [ [ [ [ [ [  Clear/Format Menu  ] ] ] ] ] ] ] ] ] ] ] ] 
--------------------------------------------------------------------
  [1] : Disk Format
  [2] : flash Format
  [3] : HDD Encryption Board Initialize
  [4] : Servicemode Password Clear
  [5] : Download File Menu
  [C] : Return to Main Menu

            Do not turn OFF power without executing the shutdown sequence.

• Disk Format: To initialize the entire hard disk
• Flash Format: To initialize the entire FLASH PCB
• HDD Encryption Board Initialize: To initialize the HDD Encryption Board

NOTE:

• With this machine, there is no function to format BOOTDEV only, which was available with the existing machines.
• For normal version update, there is no need to format the FLASH PCB/ hard disk.

■ Operation Procedure

● Overview

To format the entire hard disk or FLASH PCB
Executing format on the machine in use deletes all the user data in the hard disk or FLASH PCB as well as the MEAP application
(caution); therefore, be sure to gain agreement with the user.

NOTE:

The MEAP application data can be restored to the hard disk later by backing up MeapBackup.bin before formatting.
For details on the procedure, refer to 

“Backup/Restoration using SST” on page 496

 or 

“Backup/Restoration Using a USB Device”

on page 500

.

● Operation Procedure

1. Remove the network cable if any network cable is connected to this machine.

2. Turn ON the machine power and execute the following service mode to enter download mode.

• COPIER > FUNCTION > SYSTEM > DOWNLOAD

3. The following screen is displayed. Connect the USB memory storage device to the USB port.

Safe Version : 02.00

[ [ [ [ [ [ Wait for USB/SST Connect Menu ] ] ] ] ] ]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  [Reset] : Start shutdown sequence
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Waiting SST connection
Checking USB

             Do not turn OFF the power without executing the shutdown sequence.

6. Troubleshooting

504

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands