manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 893

COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-MCON

PSCL-TBL

1

Setting of Bk-color density increase

Detail

To set whether to increase the density of Bk-color only without changing the density of Y/M/C-
color.
When 1 is set, the parameters of auto gradation adjustment (full adjustment) are adjusted so that
only the density of Bk-color is increased.

Use Case

Upon user's request (to increase the density of Bk-color)

Adj/Set/Operate Method

1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
3) Execute auto gradation adjustment (full adjustment).

Display/Adj/Set Range

0 to 1
0: Normal, 1: Only the density of Bk-color is high

Default Value

It differs according to the location.

Amount of Change per

Unit

1

BGE-OFS

2

Fine adj at bckgd adj (bckgd removal)

Detail

To make a fine adjustment of the background adjustment (background removal) level which can
be set manually.
Break up the adjustment values into smaller ones when user does not satisfy with the default
adjustment values.

Use Case

When color fogging occurs on the output image when copying yellowed blank paper as an original

Adj/Set/Operate Method

Enter the setting value (switch negative/positive by -/+ key) and press OK key.

Caution

Since the background color is set to be washed out with this mode, not only the background of
yellowed blank paper, but also other light colors (light blue, etc.) are washed out.

Display/Adj/Set Range

-15 to 15

Default Value

0

Additional Functions

Mode

Copy> Options> Density> Background Density

■ IMG-DEV

COPIER (Service mode for copier) > OPTION (Specification setting mode) > IMG-DEV

DRM-IDL

1

Set first idle rotation time in HH Env

Detail

To set the idle rotation time to be performed at the beginning of a workday in an HH (high
temperature and high humidity) environment.

Use Case

When coarseness occurs on the image at the beginning of a workday

Adj/Set/Operate Method

1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.

Caution

When 1 is set, startup takes time.

Display/Adj/Set Range

0 to 2
0: OFF, 1: ON (HH environment only), 2: ON (all environments)

Default Value

0

8. Service Mode

881

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands