manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 469

6. This machine is automatically restarted after the writing process is completed.

Upgrading with a USB device operates with the following three modes.

• Update (Auto)

Compares the versions of the system software in the machine and the USB device, and downloads only system software
that is a new version.

• Update (w Confirmation)

Compares the versions of the system software in the machine and the USB device, and downloads system software if
it is a new version. You can select whether to download the software if it is an old version.

• Update (Overwrite all)

Downloads all the system software in the USB device, regardless of the system software version in the machine.
It is recommended that you use "Update (Auto)" when upgrading the system software of the machine.

• Update (Backupless mode)

One of the foregoing three version upgrade processes is executed without performing backup. (In the case of the foregoing
version update method, the existing system software is automatically backed up internally.)
However, the difference in processing time is only a few seconds or tens of seconds, and the effect is not significant. To
avoid risks in the event of a trouble, it is recommended to use the normal mode (backup is performed).

■ Register the system software

Register the system software registered in SST to the USB memory storage device.
For information on registering to SST, refer to 

“Registering to SST” on page 451

.

NOTE:

• Multiple versions of software can be saved simultaneously in the USB memory storage device with this machine (up to 9

versions)

• The following USB devices can be used. Interface: USB1.1 or later (USB2.0 is recommended) Memory capacity: 1GB or more

is recommended (the total file size of the system software is approx. 460MB) Format: FAT (FAT16), FAT32 (NTFS and HFS
are not supported). The memory is formatted in a partition (multiple partitions are not supported) Unusable USB memory
storage device: the memory that is protected by a password or the encryption technology.

1. Connect the USB memory storage device to the PC.

2. Start SST. Click the USB icon shown in [Select the target] screen.

6. Troubleshooting

457

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands