Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 857 / 1225

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
AMSOFFSW 1 OFF/ON of AMS mode
Detail Usually, AMS mode is enabled automatically when the following conditions are satisfied.
- AMS license which is an iR option is installed.
- AMS-supported Login application is activated.
Set 1 when preferring to disable (OFF) the AMS mode.
For North/Middle/South America and for Europe, the default is OFF. Use this item when preferring
to enable (ON) the AMS mode.
Use Case - When disabling (OFF) the AMS mode
- When enabling (ON) the AMS mode (for North/Middle/South America and for Europe)
Adj/Set/Operate Method 1) Press Counter button, and check that "ACCESS MANAGEMENT SYSTEM" is displayed on the
Device Configuration screen.
2) Enter 1, and then press OK key.
3) Turn OFF/ON the main power switch.
4) Check that the AMS mode is OFF (by pressing Counter button and check that "ACCESS
MANAGEMENT SYSTEM" is not displayed on the Device Configuration screen).
Display/Adj/Set Range 0 to 1
0: ON, 1: OFF
Default Value JP:0, USA:1, EUR:1, AU:0, CN:0, KR:0, TW:0, ASIA:0
Supplement/Memo AMS: Access Management System
When the device is in AMS mode, "ACCESS MANAGEMENT SYSTEM" is displayed in Check
Counter> Check Device Configuration.
UA-OFFSW 1 ON/OFF of unified auth function
Detail To set ON/OFF of the Unified Authentication function.
Set the value to 0 when not preferring to use the Unified Authentication function because of security
concern.
Use Case
Upon user's request (not to use the Unified Authentication function)
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: ON, 1: OFF
Default Value
0
Supplement/Memo Unified Authentication: A function which enables the functions of the machine and applications to
be used after being authenticated once.
MIB-NVTA 1 RFC-compatible character strg: MIB write
Detail As default, MIB object which NVT-ASCII can be written exists in order to link with the value on the
Control Panel. This violates RFC order, so a problem like garbled 2-byte characters may occur in
the SNMP monitoring system, such as other vendor's MPS.
Whether to allow writing of non-RFC-compatible character strings in MIB can be set using this
item.
When 1 is set, only the character strings which are strictly compatible with RFC are written. (Writing
operation is executed from the SNMP manager.) It is not linked with the value on the Control Panel.
Use Case Upon user's request (to operate with RFC-compatible system)
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: Compatible in a conventional manner, 1: RFC-compatible, 2 to 3: Not used
Default Value 0
Supplement/Memo RFC: Document of Internet-related technical standards
NVT-ASCII: Network Virtual Terminal-ASCII
8. Service Mode
845