Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 884 / 1225

COPIER (Service mode for copier) > OPTION (Specification setting mode) > CLEANING
ITB-CL-T 2 Set toner band form intvl: ITB Cln Blade
Detail To set the interval to form toner band for preventing flipping of the ITB Cleaning Blade.
The interval is determined by entering the amount of increase/decrease (sheet) compared to the
specified number of fed sheets.
Decrease the value when noise comes from the ITB due to the flipping. If the interval to form toner
band is decreased, flipping can be prevented, but toner consumption is increased.
Use Case - When noise comes from the ITB
- When low productivity or high toner consumption is pointed out by the user
Adj/Set/Operate Method Enter the setting value (switch negative/positive by -/+ key) and press OK key.
Caution Do not use this when the machine is operating correctly.
Display/Adj/Set Range -10 to 10
Unit sheet
Default Value 0
Related Service Mode COPIER> OPTION> CLEANING> ITB-CL-L
■ FEED-SW
COPIER (Service mode for copier) > OPTION (Specification setting mode) > FEED-SW
EVLP-SPD 1 Setting of envelope feeding speed
Detail To set the feeding speed of envelope.
By feeding an envelope at 1/2 speed (default) in the case of a high humidity environment, the glue
flap may adhere at the time of fixing. As a result of that, the envelope may not be opened.
When 1/1 speed is set, adhesion can be prevented, but fixing performance is decreased in a low
humidity environment.
Use Case
When a glue flap of envelope adheres
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution When 1 is set in a low humidity environment, fixing performance is decreased.
Display/Adj/Set Range 0 to 1
0: 1/2 speed, 1: 1/1 speed
Default Value 0
Related Service Mode COPIER> OPTION> FEED-SW> EVLP-FS
PINT-REG 2 Set img pstn crrct exe frqcy: ppr intvl
Detail To set the frequency to execute image position correction control at paper interval.
When 1 is set, frequency is increased. Compared with the default setting, the interval becomes
shorter. In addition, the machine becomes sensitive to change in temperature and the control is
executed even with B&W image. Color displacement is less likely to occur, but productivity is
decreased.
Use Case When color displacement occurs frequently
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution When 1 is set, productivity is decreased.
Display/Adj/Set Range 0 to 1
0: Default, 1: High frequency
Default Value 0
8. Service Mode
872