manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 166

MEAP Application Configuration Service

This service manages the MEAP application setting information. It has functions such as saving setting information to the MEAP
area. Ver 57 of MEAP Specifications supports this service.

MEAP Application Log Service

This service is used to collect MEAP application logs (debug logs and authentication logs).
Ver 58 of MEAP Specifications supports this service.
The collected logs can be downloaded or deleted in Remote UI.
The settings such as the log level to be saved cannot be made from SMS.
These settings depend on the MEAP application. For detailed information, refer to the manual for the application.

● Advantages Obtained When Using the Services

By using MEAP Application Configuration Service and MEAP Application Log Service, as long as the MEAP application supports
these services, you can perform data management tasks all together.

In case of devices and MEAP application that do not support the service

App1

Dedicated management tool

Config data

(App1 format)

App1

Device

Pref data

Log data

Setting and reference 

App2

Dedicated management tool

Config data

App2

Pref data

Log data

(App1 format)

(App1 format)

(App2 format)

(App2 format)

(App2 format)

Setting and reference 

Setting and reference 

Setting and reference 

As for devices and MEAP application that do not support the service, the setting information and log data are managed separately
by application.

In case of devices and MEAP application that support the service

App1

App2

Setting and reference

Configuration

Config data

 (common format)

Device

Preference data

Log data

Platform

General-purpose management tool

Configuration

 management service

 (common format)

 (common format)

Preference

 management service

Log

management service

2. Technology

154

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands