manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 1223

Removal

 Removal

■ Overview

• User data kept by the machine contains address books and inbox documents that users can recognize.
• By using the copy, print, or send function, there is also information left on the HDD of MFPs that is generally not recognizable

but can be recovered as documents. (Refer to the illustration on the next page.)

• For security, the user mode is provided to delete data on FLASH PCB and perform overwrite deletion to render user data on

HDD unrecoverable.

● User data delete

• To delete user data, execute Settings/Registration > System Management > Initialize All Data/Settings in user mode.

Performing Initialize All Data/Settings returns user mode setting values to their factory defaults.

• Deletion Mode can be changed. Normally, "Once with 0 (Null) Data" can sufficiently delete data. Note that increasing the

number of overwrite increases the time required for the deletion operation.

NOTE:

• When you perform Initialize All Data/Settings, license and data of MEAP application are initialized to the state same as when

the HDD is replaced. If MEAP application may be used by other users after the machine is removed, disable the MEAP
application and uninstall it in advance.

• Performing Initialize All Data/Settings does not delete the license of the system option.

● Deletion of Service Mode Settings

The user mode setting values may have been changed at the user's request. In that case, the service mode setting values should
be changed back to the default values before removing the machine.

■ Work Procedure

If the user uses MEAP applications, ask the user to uninstall the MEAP applications if necessary.

● User data delete procedure

1. Settings/Registration > Management Settings > Data Management > Initialize All Data/Settings
2. Select a deletion mode.

Removal

1211

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands