Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 102 / 1225

Prior delivery alarm
Display Remaining Toner error
*7 Empty toner
Detected to (location)
Toner supply count
*4 Toner Density Sensor
Message
(Operation of the host
machine) None Toner is low. Replacement not yet nee-
ded.
(Continuous printing is enabled.) Replace the toner cartridge.
(Host machine is stopped.)
Alarm Code
10-0017 (Y)
*5
10-0018 (M)
*5
10-0019 (C)
*5
10-0020 (Bk)
*5
10-0001 (Bk)
*6
10-0002 (C)
*6
10-0003 (M)
*6
10-0004 (Y)
*6
None
* 1: The default differs depending on the country.
* 2: (Lv.1) COPIER > OPTION > FNC-SW > T-DLV-CL/BK
* 3: (Lv.2) COPIER > OPTION > DSPLY-SW > T-LW-LVL
CAUTION:
The message to inform of the absence of toner may be displayed before the message to warn of the remaining toner level
if the value of (Lv.2) COPIER > OPTION > DSPLY-SW > T-LW-LVL is lowered than the initial value due to the margin of
the toner supply count.
* 4: Toner supply count shows the level of toner supplied from the Toner Container to the Developing Unit.
* 5: When an unidentified Toner Bottle is used, pre-toner low alarm is generated at the same time no toner is detected and the
machine stops.
* 6: Alarm code created by UGW (it is not recorded in the LUI log).
* 7: Whether to display the message to warn of the remaining toner level can be set in COPIER > OPTION > DSPLY-SW > TNR-
WARN (Lv.1).
Service Mode
• Setting of the Bk-color Toner Container prior delivery alarm notification timing:
COPIER > OPTION > FNC-SW > T-DLV-BK
• Setting of the Y/M/C-color Toner Container prior delivery alarm notification timing:
COPIER > OPTION > FNC-SW > T-DLV-CL
• Setting of the remaining toner level warning display timing (Lv.2):
COPIER > OPTION > DSPLY-SW > T-LW-LVL
• ON/OFF of toner warning display
COPIER > OPTION > DSPLY-SW > TNR-WARN
Alarm Codes
Pre-toner low alarm (each color)
• 10-0017: (Y)
• 10-0018: (M)
• 10-0019: (C)
• 10-0020: (Bk)
Toner low (each color) alarm
• 10-0001: (Bk)
• 10-0002: (C)
• 10-0003: (M)
• 10-0004: (Y)
● Detection of Toner Container Premature Replacement / Toner Replacement Completion
Purpose
To detect completion of replacement of the Toner Container. To prevent replacement of a Toner Container that can still be used.
Conditions for execution
The toner container premature replacement detection function works from the versions shown below. The toner replacement
completion detection function works in any version.
MN-CON: 14.02
DC-CON: 15.01
2. Technology
90