Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 929 / 1225

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
IFAX-OF 1 Setting of I-Fax TX to entered address
Detail To set whether to allow I-Fax transmission to a newly entered address.
When 1 is set, I-Fax transmission is not available by entering the address because "I-Fax" is not
displayed on the transmission screen.
The addresses already registered in the Address Book can be used.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete them because the addresses
registered in the Address Book can be used.
Display/Adj/Set Range 0 to 1
0: Allowed, 1: Prohibited
Default Value 0
LDAP-DEF 1 Set of LDAP server ini search attribute
Detail To set initial condition for search attribute that is specified at the time of Details search from the
LDAP server.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5: No registration 1 (any setting),
6: No registration 2 (any setting)
Default Value
0
Related Service Mode COPIER> OPTION> USER> LDAP-SW
FREE-DSP 2 ON/OFF of charge disable screen
Detail To set whether to display the charge disable screen for switching between charge and no charge.
When 1 is set, the charge disable screen is displayed and it becomes possible to switch to the
mode in which all the services are available for free (store manager mode) by temporarily canceling
the charging system.
Use Case When enabling all the services to be provided for free by temporarily canceling the charging system
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
Supplement/Memo The hardware switch for switching charge/no charge in the Coin Manager enables the mode which
temporarily cancels the charging system.
TNRB-SW 2 Set of Toner Container counter display
Detail To set whether to display the Toner Container counter on the Counter Check screen.
Use Case
When showing the Toner Container counter to the user
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 3
0: Hide, 1: Display (70s only), 2: Not used, 3: Display (70s/180s)
Default Value
It differs according to the location.
Supplement/Memo 60s: The number of premature replacements of the Toner Container
70s: The number of installations of a new Toner Container
80s: The number of installations of a new Toner Con the number of premature
replacements
180s: The number of installations of unidentified Toner Container
8. Service Mode
917