manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 454

■ Collection of Log

Save the Sublogs stored in the host machine to a USB device or a PC with SST installed.
The procedure for storing Sublogs to a USB device differs from that for storing Sublogs to a PC

● Collecting into a USB Device

To save (collect) Sublogs to a USB device, perform the procedure shown below to collect the logs.
If SST is used to save (collect) Sublogs to a PC, this work is not necessary.

1. Connect the USB flash drive to the machine.

2. Execute the following service mode.

COPIER > Function > SYSTEM > DOWNLOAD

3. The host machine will enter download mode. Press [8] on the Numeric Keypad.

[ [ [ [ [ [ [ [  Root Menu  (USB) <v25.12>  ] ] ] ] ] ] ] ]  (v25.12)
-------------------------------------------------------
  [ 1 ] : Select Version

  [ 4 ] : Clear/Format
  [ 5 ] : Backup/Restore
  [ 8 ] : Download File

  [ 9 ] : Version Information
  [ Reset ] : Start shutdown sequence

4. [Download File Menu] will appear. Press a numeric key for the file to download.

[ [ [ [ [ [ [ [  Download File Menu  (USB) <v25.12>  ] ] ] ] ] ] ] ]  (v25.12)
------------------------------------------------------------------------
  [ 1 ] : SUBLOG Download
  [ 4 ] : ServicePrint Download
  [ 5 ] : NetCap Download
  [ C ] : Return to Menu

• Press [1] key to download Sublog.
• Press [5] to download network packet log.

5. The files to be downloaded and the number of files are displayed. Check the following items and press [0] on the

Numeric Keypad.

• Whether the manual log that was saved at the time of reproduction of the symptom is displayed under Event Logs
• Whether the date and time at which the symptom was reproduced is within the period of Continuous Log

Example: When the symptom was reproduced at 9:40 on April 14, 2017 and a manual log was saved
Check that the manual log that was generated at 9:40 on April 14, 2017 is displayed under Event Logs.

[ [ [ [ [ [ [ [  Sublog Download (Ev CuntinuousLog  ] ] ] ] ] ] ] ]  
-----------------------------------------------------------------------------------------

Event Logs ( lastest 10 files) :
        20161010_14-00--V_exception
ContinuousLog :
       Period        :    20161012_0521-15 to 20161013_1733-36
Toral     :     102files
/ Execute ? /
-(OK) :  0   /   (CANCEL)   :  Any other keys -

6. When downloading of the log files is completed, the following message will appear. Press any key.

6. Troubleshooting

442

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands