manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 180

2. Click the [Uninstall] of the login service you want to uninstall.

■ Setting the User Authentication Method

In the case of User Authentication, it is possible to use a combination of multiple authentication methods. The combination can
be changed from the User Authentication setting screen. (For details, refer to e-Manual > Authentication > Setting the User
Authentication Function Environment > Using the Remote UI > Preference Settings.)

NOTE:

The default user authentication method is "Local Device Authentication".

CAUTION:

• To ensure the security, it is recommended to change the password and the user name of the Local Device

Authentication administrator from those at the time of shipment immediately after you have started using SSO-H.

• Since department ID and password are not assigned to domain users, distributing setting information where the

department ID is enabled to a device where the server authentication is enabled may make the device unable to be
logged in.

■ Setting the method to login to SMS

The procedure for changing the login method for SMS is indicated below.
The procedures for changing the password authentication Start/ stop settings are as follows.

2. Technology

168

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands