Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 922 / 1225

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
P-CRG-LF 1 ON/OFF of Drum Unit life warning display
Detail To set whether to display a warning message when the Drum Unit reaches its life.
When 1 is set, a warning message is displayed on the status line of the Control Panel seven days
later that the value of Y/M/C/K-DRM-LF reached the setting value of D-DLV-CL/BK.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
Related Service Mode COPIER> COUNTER> LF> Y/M/C/K-DRM-LF
COPIER> OPTION> FNC-SW> D-DLV-BK/CL
Supplement/Memo The timing to display the warning message can be adjusted by D-DLV-CL/BK.
CPRT-DSP 1 ON/OFF of [Print Charge Log] button dspl
Detail To set whether to display [Print Charge Log] button to print the charge logs on the charge log
screen in Settings/Registration menu.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value 0
Additional Functions
Mode
Management Settings> Charge Management> Charge Log
PCL-COPY 2 Set of PCL COPIES command control method
Detail To set the binder control method of COPIES command with PCL.
Select whether to use the control method of Canon-made PCL or use a method equivalent to that
of non-Canon-made PCL.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 65535
0: Control method of Canon-made PCL (following the value of COPIES command that is specified
for each page to control on a page basis)
1: Control method of non-Canon-made PCL (handling the value of COPIES command, which is
specified for page 1 when collating, as bind figure while the value of COPIES command for the
next page or later is invalid. Same control applies as Canon-made PCL when not collating)
2 to 65535: For future use
Default Value 0
CNT-SW 1 Set default dspl items on charge counter
Detail To set default display items of the charge counter on the Counter Check screen.
For details of each type, refer to the Service Manual.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Type 1, 1: Type 2
Default Value 0
Related Service Mode COPIER> OPTION> FNC-SW> CONFIG
8. Service Mode
910