Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 701 / 1225

■ ANALOG
COPIER (Service mode for copier) > DISPLAY (State display mode) > ANALOG
TEMP 1 Display of outside temperature
Detail To display the temperature outside the machine.
This is measured by the Environment Sensor that detects the outside air.
Use Case When checking the temperature outside the machine
Adj/Set/Operate Method N/A (Display only)
Display/Adj/Set Range 0 to 60
Unit deg C
Appropriate Target Value Room temp/-5 deg C
Amount of Change per
Unit
1
HUM 1 Display of outside humidity
Detail To display the humidity outside the machine.
This is measured by the Environment Sensor that detects the outside air.
Use Case When checking the humidity outside the machine
Adj/Set/Operate Method N/A (Display only)
Display/Adj/Set Range 0 to 100
Unit %
Appropriate Target Value 1 - 99
Amount of Change per
Unit
1
ABS-HUM 1 Display of outside moisture content
Detail To display the absolute moisture content outside the machine.
This is measured by the Environment Sensor that detects the outside air.
Use Case
When checking the moisture content outside the machine
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
0 to 100
Unit g/m3
Appropriate Target Value 0 - 50
Amount of Change per
Unit
1
FIX-E 1 Dspl of Fixing Heater center temperature
Detail To display the center temperature of the Fixing Heater detected by the Main Thermistor.
Use Case When checking the temperature at the center of Fixing Heater
Adj/Set/Operate Method N/A (Display only)
Display/Adj/Set Range 0 to 300
Unit
deg C
Appropriate Target Value
20 - 230
Amount of Change per
Unit
1
8. Service Mode
689