manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 210

Updater

 Functional Overview

■ Overview

Updater provides functions that enable network communication with Content Delivery System (hereinafter CDS) to install
firmware, MEAP applications and system options.

• Firmware Installation

Updater function enables users to distribute firmware through CDS via Internet. Particularly on e-Maintenance/UGW (called
NETEYE in Japan)-enabled devices, firmware can be updated remotely, which effectively slashes costs incurred in field
services.

• MEAP Application/System Option Installation

By linking devices to CDS and License Management System (providing the function to manage licenses; hereinafter LMS),
applications can be installed in devices via Updater, regardless of those not embedded (MEAP application) or embedded
(system options) in devices.

■ Installing Firmware

With link to Updater, service technicians provide firmware install services in the following 3 methods.

Distribution Method

Download

Commanded

by:

Update

Timing

Downloadable Firmware Versions

Previous Ver

Current Ver

Newer

Ver

UGW-linked Download / Update
(Full-remote update)

UGW

Auto

No

Yes

Yes*1

UGW-linked Download
(Remote Distribution / Update)

UGW

Manual

Yes

Yes

Yes

Manual Download / Update
(On-site Update via Service mode)

Local UI

Auto

No

Yes

Yes*1

Manual

Yes

Yes

Yes

*1:You can select the version allowed Remote Update.

● UGW-linked Download and Update (Full-Remote Update)

If the device is linked to UGW and the distribution schedule and update setting are registered on UGW in advance, full remote
firmware update is available on this device. Upon downloaded from CDS, the firmware is updated on the device.

1) Set up customers,
device types, distribution
schedule and the
command for download

3) Give a firmware distribution
command to e-RDS.

Firmware Upload

4) Download
firmware

5) Writing process is
automatically started upon
download completed.

2) Notify distribution
information to CDS.

 is

ted upon

inf

inf

orm

orm

ati

ati

on 

Firmware

CDS

e-RDS

on

ad

UGW Operator

Sales Company

/ Partner

5) Writin

Updater

dev
sch
com

2) 

2) 

2) 

2) 

Not

Not

Notify di

UGW

UGW

imageRUNNER

ADVANCE

Canon Inc.

imageRUNNER

● UGW-linked Download (Remote Distribution / Update)

If the device is linked to UGW and the distribution schedule is registered on UGW in advance, firmware can be distributed to this
device before a service technician actually visits the customer site. This allows the service technician to update the firmware
manually immediately after completing device inspection.

2. Technology

198

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands