manualshive.com logo in svg

APRILIA DORSODURO FACTORY ABS 2011, Service Station Manual

Share
Download
APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual Download Page 250

•

Place the gear selector drum and

check that it is correctly timed; thrust

the desmo drum axially from the fly-

wheel side so that the timing roller pro-

trudes.

•

Tighten the gear selector drum fixing

screw.

•

Position the tone wheel.

•

Tighten the tone wheel with the special

tool.

Use Loctite medium-strength for sealing.

Specific tooling

020715Y

 

Tone wheel removal

Engine

DORSODURO FACTORY ABS

ENG - 250

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO FACTORY ABS 2011




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands