manualshive.com logo in svg

APRILIA DORSODURO FACTORY ABS 2011, Service Station Manual

Share
Download
APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual Download Page 192

Removing the flywheel cover components

•

Remove the two pick-up fixing screws.

•

Remove the three stator fixing screws.

CAUTION

THE PICK-UP AND STATOR SHALL BE REMOVED SIMUL-
TANEOUSLY AS THEY ARE PART OF THE SAME ELEC-
TRICAL BRANCH.

Magneto flywheel removal

•

Remove the flywheel cover.

•

Undo and remove the screw and re-

move the retention plate.

•

Heat the magneto flywheel with the

specific heater.

•

Lock the flywheel using the specific

tool and loosen the screw.

Specific tooling

020713Y

 

Flywheel extractor

Engine

DORSODURO FACTORY ABS

ENG - 192

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Summary of Contents for DORSODURO FACTORY ABS 2011




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands