Rockwell Automation Publication 2198-UM002E-EN-P - February 2018
49
Chapter
3
Mount the Kinetix 5700 Drive System
This chapter provides the system installation procedures for mounting your
Kinetix® 5700 drive system to the system panel.
This procedure assumes that you have prepared your panel and understand
how to bond your system. For installation instructions regarding equipment
and accessories not included here, refer to the instructions that came with those
products.
Topic
Page
Mount Your Kinetix 5700 Drive Modules
SHOCK HAZARD:
To avoid the hazard of electrical shock, perform all
mounting and wiring of the Kinetix 5700 drive system before applying
power. Once power is applied, connector terminals can have voltage present
even when not in use.
ATTENTION:
Plan the installation of your system so that you can perform all
cutting, drilling, tapping, and welding with the system removed from the
enclosure. Because the system is of the open type construction, be careful to
keep metal debris from falling into it. Metal debris or other foreign matter
can become lodged in the circuitry and result in damage to the components.