138
Rockwell Automation Publication 2198-UM002E-EN-P - February 2018
Chapter 6
Configure and Start the Kinetix 5700 Drive System
Understand the Kinetix 5700
Display
The Kinetix 5700 drives have two status indicators and an LCD status display.
The indicators and display are used to monitor the system status, set network
parameters, and troubleshoot faults. Four navigation buttons, directly below
the display, are used to select items from a soft menu.
Figure 92 - Kinetix 5700 Drive LCD Display and Status Indicators
This is the Home screen.
• The setup selections are tied to the Setup (left-side) buttons and the
menu selections
are tied to the Menu (right-side) buttons.
• For dual-axis inverters, the Drive (center) buttons toggle the display
between drive A and B (A is the default drive).
The soft menu provides a changing selection that corresponds to the current
screen. Use the navigation buttons to perform the following.
PRECHARAGE
192.168.1.1
DC BUS: 0.3V
PRECHARGE
192.168.1.1
DC BUS: 0.3V
MOD–
NET–
5700
Soft Menu
Navigation Buttons
Status Indicators (see
)
PRECHARAGE
192.168.1.1
DC BUS: 0.3V
PRECHARAGE
192.168.1.1
DC BUS: 0.3V
A
B
Menu
Setup
DC-bus Power Supplies
and Single-axis Inverters
Dual-axis Inverters
Setup Drive
Menu
Press to go back. Pressing enough times results in the Home
screen.
Pressing either arrow moves the selection to the next (or previous) item. When changing
values, pressing the up arrow increments the highlighted value. Values rollover after
reaching the end of the list.
Press to select values to change, moving from right to left. Values rollover when reaching the
end of the list.
Press to select a menu item.
Press to return to the Home screen.
Press to display the fault help (possible solutions in troubleshooting tables).
(1)
beginning on
to review the troubleshooting tables.
MAIN MENU
MOTOR INFO
MODULE INFO
Each soft menu item is executed by pressing the
navigation button directly below the item, as
shown in this example.
?