manualshive.com logo in svg

NXP Semiconductors LPC43Sxx, Руководство пользователя

Поделиться
Скачать
NXP Semiconductors LPC43Sxx Скачать руководство пользователя страница 16

UM10503

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2015. All rights reserved.

User manual

Rev. 2.1 — 10 December 2015 

16 of 1441

NXP Semiconductors

UM10503

Chapter 1: Introductory information

–

(Parts with on-chip flash only): Event recorder with three inputs to record event 
identification and event time; can be battery powered.

–

Alarm timer; can be battery powered.

•

Analog peripherals

–

One 10-bit DAC with DMA support and a data conversion rate of 400 kSamples/s.

–

Two 10-bit ADCs with DMA support and a data conversion rate of 400 kSamples/s. 
Up to eight input channels per ADC.

–

One 6-channel, 12-bit high-speed ADC (ADCHS) with DMA support and a data 
conversion rate of 80 MSamples/s (LPC4370 only).

•

Security (LPC43Sxx only)

–

AES decryption programmable through an on-chip API.

–

Two 128-bit secure OTP memories for AES key storage and customer use.

–

Random number generator (RNG) accessible through AES API.

–

Unique ID for each device.

•

Clock generation unit

–

Crystal oscillator with an operating range of 1 MHz to 25 MHz.

–

12 MHz Internal RC (IRC) oscillator trimmed to 1.5 % (flashless parts) or 3 % 
(flash-based parts) accuracy over full temperature range and voltage.

–

Ultra-low power Real-Time Clock (RTC) crystal oscillator.

–

Three PLLs allow CPU operation up to the maximum CPU rate without the need for 
a high-frequency crystal. The second PLL is dedicated to the High-speed USB, the 
third PLL can be used as audio PLL.

–

Clock output.

•

Power 

–

Single 3.3 V (2.2 V to 3.6 V) power supply with on-chip DC-to-DC converter for the 
core supply and the RTC power domain.

–

RTC power domain can be powered separately by a 3 V battery supply.

–

Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep 
power-down.

–

Processor wake-up from Sleep mode via wake-up interrupts from various 
peripherals. 

–

Wake-up from Deep-sleep, Power-down, and Deep power-down modes via 
external interrupts and interrupts generated by battery powered blocks in the RTC 
power domain.

–

Brownout detect with four separate thresholds for interrupt and forced reset.

–

Power-On Reset (POR).

–

Available as LBGA256, TFBGA180, and TFBGA100 packages and as LQFP208 
and LQFP144 packages.

Содержание LPC43Sxx


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды