Menu Tables
458
FQ2-S4 User’s Manual
12-1 Menu Tables
Image Tab Page
Menu command
Description
Setting range
Data
Refer-
ence
Camer
a
setup
Focus
The value shown here is used as a refer-
ence when adjusting the focus with the
focus adjustment screw.
---
---
Image mode
Pixel sampling can be applied to the
input image to reduce image input time.
Normal (default) or Fast
Scene
Shutter speed
(Normal mode)
Sets the shutter speed for Normal Mode. FQ2-S4
@
-
@@@
1/1 to 1/60,000
FQ2-S4
@@@@@
-08
@
1/1 to 1/60,000
1/250 to 1/60,000 (for Sensors with
Built-in Lighting)
FQ2-S4
@@@@
or FQ2-S4
@@@@
-M
1/1 to 1/50,000
1/250 to 1/50,000 (for Sensors with
Built-in Lighting)
Default: 1/250
Scene
Gain
(Normal mode)
If the gain is high, the image will be
bright. If the gain is low, the image will be
dark.
For FQ2-S4
@@@@@
-08
@
,
FQ2-S4
@
-
@@@
Range: 0 to 10 (default: 10)
For FQ2-S4
@@@@@@
,
FQ2-S4
@@@@@@
-M
Range: 16 to 64 (default: 16)
Scene
Brightness
(HDR mode)
Sets the brightness level of the image for
HDR Mode.
1 to 100
Scene
HDR
Suppresses reflections and differences
in brightness.
OFF(default), Level 1 to Level4
Scene
Brightness correc-
tion
Use to stabilize the brightness.
ON or OFF (default)
Scene
White balance
Corrects differences in coloring between
the image and the actual object.
• AUTO
• R: 0.001 to 7.999
• G: 0.001 to 7.999
• B: 0.001 to 7.999
Scene
Partial input
Used to make the image input range
smaller.
FQ2-S4
@@@@@/
FQ2-S4
@@@@@
-M
:
752
×
8 to 752
×
480
FQ2-S4
@@@@@@
-08
@:
928
×
8 to 928
×
828
FQ2-S4
@
-
@@@:
1280
×
8 to
1280
×
1024
Scene
Rotate 180
You can rotate the Camera image by
180
°
.
ON or OFF (default)
Scene
Calibration setting
Sets a registered calibration pattern.
Unregistered (default), New Calibra-
tion, or Calibration Data 0 to 31
Scene
Ligh
tni
ng co
ntr
o
l
Strobe output delay
Sets the delay time for the strobe output
signal (STGOUT) in response to the trig-
ger signal.
0 to 65,535
µ
s (default: 0
µ
s)
Scene
Strobe output time
Sets the output time of the strobe output
signal (STGOUT).
0 to 65,535
µ
s (default: 1,000
µ
s)
Scene
T
rigger
set
u
p Trigger delay
Adjusts the time until the Camera shutter
opens after the trigger signal is received.
0 to 163 ms (default: 0)
System
Summary of Contents for FQ2-S4
