![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879128.webp)
Reading 2D-codes
126
FQ2-S4 User’s Manual
Changing the Character String That Is Output for Read Errors
You can change the character string that is output for read errors.
[Inspect]
−
[Inspection]
−
[Add item.]
−
[2D-code]
−
[Details] Tab Page
−
[Output parameter]
−
[Error string]
Changing the Items That Are Displayed on the Test Measurement and Run Display
To change the items that are displayed on the test measurement and run display, press [Test]
−
[Continuous
test]
−
and then use
−
[Display setting] on the Test Display.
Unstable Reading Results
Reading Is Unstable Due to Low Contrast
Adjust the brightness to improve the contrast of the 2D code.
Adjusting the Brightness: p. 61
The read character string is output after the other output data (data 0 to 31 in the output data settings) after the mea-
surement, such as the inspection item parameters and calculation results. Refer to the following section for the loca-
tion of the output area for the character string and other details.
Order in Which Data Is Written When Both Output Data and the Character String Are Output: p. 347, p. 383
Setup Item
Setting Value
Description
Error string
Max. 20 digits (default value:
NG)
Sets the text string to be output when a read error occurs.
Display setting
Description
Num. of char.
Displays the number of characters that were read.
Characters
Displays the character string that was read.
Note
Summary of Contents for FQ2-S4
