![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879220.webp)
Shortening the Measurement Takt Time
218
FQ2-S4 User’s Manual
If you use partial input, perform teaching again. Partial input on the X axis is supported only by the FQ2-
S4
@@@@@
/FQ2-S4
@@@@@
-M.
Changing the Image Input Mode
Pixel sampling can be applied to the input image to reduce image input time.
[Image]
−
[Camera setup]
−
−
[Image input mode]
If you change the image input mode, perform teaching again.
• The minimum input widths are 16 for the X axis and 8 for the Y axis.
• The values of the monitor display positions are displayed for the coordinates in the measurement results.
• The coordinate values will not change as a result of the partial input settings.
Parameter
Setting
Description
Image Input
Mode
High-speed or Standard
Default for FQ2-S4
@@@@@
/FQ2-S4
@@@@@
-M:
High-speed, Default for FQ2-S4
@@@@@
-08/FQ2-S4
@
-13
@
:
Standard
Pixel sampling can be applied to the input image to
reduce image input time.
Note
Important
Important
Summary of Contents for FQ2-S4
